Precision CNC machining is performed using a vertical CNC machine tool, which can meet basic material processing requirements. When processing, it is necessary to pay attention to tightening the cuffs, and the operator should stand in a safe position to avoid moving parts of the machine tool and chip splashes. Next, let's introduce the precision CNC machining method. Pay attention to the following details:

1、 Precision CNC machining method

1. Vertical CNC machine tools are used for machining. The drill bits of vertical machine tools are drilled from top to bottom, and there are CNC machines specialized in processing long materials. Our CNC machine tools have a length of 6 meters, and the longest length has been processed for 6.5 meters of long materials. The main processing methods of CNC machine tools are milling, drilling, tapping, etc. These can basically meet the processing requirements of long materials.

2. Punch processing, stamping processing is applicable to relatively thin aluminum profiles, not too long aluminum profiles. Things like frames and covers are very suitable for stamping. The stamping die for long material stamping of aluminum profiles is an integrated type, which can process holes and grooves on the entire surface in one press, with very high efficiency. In particular, automated production lines have greatly improved productivity.

3. Drilling machine processing and long material drilling machine processing mainly focus on drilling and tapping, while ordinary drilling machine processing is time-consuming and wasteful of manpower. Because the material is long, it needs to be supported by one person and processed by another person. Long material machining with drilling machines is only suitable for orders with relatively small quantities or for products with sample production.

2、 Precautions for precision CNC machining

1. When processing workpieces, it is necessary to tighten the cuffs and tie the lapel tightly. It is strictly prohibited to wear gloves, scarves, or open clothes to operate the rotating machine tool.

2. Check whether the protective devices on the equipment are intact and closed.

3. Workpieces, fixtures, tools, and cutting tools must be firmly clamped.

4. Before driving, observe the surrounding dynamics, and remove any objects that hinder operation and transmission. No one is allowed to stand near the processing point. After starting the machine tool, the operator should stand in a safe position to avoid moving parts of the machine tool and chip splashes.

5. Before the machine tool is stopped, it is not allowed to contact moving workpieces, cutting tools, and transmission components. It is strictly prohibited to transfer or take tools and other items across the rotating and transmission parts of the machine tool.

6. The machine must be stopped to adjust the stroke and limit position of the machine tool, clamp and disassemble the workpiece and cutter, measure the workpiece, and wipe the machine tool.

7. No tools or other items shall be placed on the guide rail surface or workbench of the machine tool.